Gary Numan / Tubeway Army (riff) That Minimoog-and-Polymoog lead. Try it on the Pisces saw pad first. Placeholder entry.
Month: October 2026
Gary Numan & Skaparis Orchestra – Are ‘Friends” Electric (live) (Joey Lindström)
A detuned saw pad in a few lines of CSound
Three vco2 saws a few cents apart, through moogladder with an envelope on the cutoff, gives a pad that’s warm without any effects: instr Pad kenv madsr 1.5, 0.5, 0.7, 2 asig = vco2(0.2, p4) + vco2(0.2, p4 * 1.004) + vco2(0.2, p4 * 0.996) aflt moogladder asig, 400 + kenv * 2400, 0.3 outs… Continue reading A detuned saw pad in a few lines of CSound
The Csound FLOSS Manual
The best way into CSound I've found. Practical, with runnable examples.
Four identical OLEDs on one I2C bus
SSD1306 boards usually only offer two addresses (0x3C and 0x3D), so four of them can’t share a bus directly. A TCA9548A mux at 0x70 fixes it: write a single byte with the channel bit set, then talk to the display at 0x3C as normal. bus.write_byte(0x70, 1 << channel) # select channel 0–7 Remember to deselect… Continue reading Four identical OLEDs on one I2C bus
Tidepool (sketch)
A slow sketch made with the Pisces engine: a detuned saw pad through a resonant low-pass, with a filter LFO a little slower than the arpeggio. Placeholder entry; the audio is a generated demo.